Tire Valve Blog
Header image

Car Tire Valve maintenance and replacement

 For as the consumables tire, the answer is:” a must!”

 For tire wear is normal, if used improperly or tire positioning caused by wear, is a normal phenomenon, such as you are to a certain speed, vehicle vibration, this time may well be the balance wheel is a problem, to quickly repair, avoid the occurrence of abnormal wear. (1 points, do not know 0points)

 Tyre wear on both sides of too large may be insufficient or long-term inflatable vehicle overload running causes the tire contact area with the ground caused by too much. Of course, the size of the tire is not appropriate or inflatable volume, will also accelerate the tyre wear.

TR414C  car Tire Valve

 Usually running3to 4 or6 to80000 kilometers above, it should be replaced. Due to the new and old tyre tire tread wear degree differs very big, suggested a change two flat front or rear tire, tire grip to ensure balance.

 Advance purchase spare tire, when on the road encounter unexpected situations can be prepared against want.

 When in need of replacement tires, the original tire is the first choice, followed by the need to consider is the tire tread, mentioned earlier, besides the appearance effect to vehicle road. If the control is not very satisfied, for many models, improved the vehicle’s appearance and handling performance of one of the most effective methods is to replace the low flat than the tire.

 DIY is now more and more people, attention is required, with different specifications, structure, the degree of abrasion of the tyre can not be mixed use, otherwise it will affect the vehicle handling and stability.

 In order to maximize the performance of the best vehicle design, four wheels with the same kind of tire, at least a coaxial using the same specifications and structure of tyre.

 Don’t put different types of tires mixed use, such as putting more suitable for off-road vehicle tyres, car tyres and generally put together, or the directional sports car tyres and tyre wheel mixed use, remember: replacement of the tire tread to the original parameter matching. For example, all-season tires to replace all-season tires, snow tires to replace the snow tires, H speed tire don’t change into other velocity stage.

“ Car Tire Valve ” main body is a hollow upper, lower solid cylinder, at the lower end of the side to open a small hole communicated with the hollow part. Following a period of elastic thin margin hose constitute specialized core overall. Actually it is a one-way valve, when you pumped up the bicycle, the compressed air in the cylinder by the hollow portion into the auto valve, the elastic rubber tube” top”, air into the tire; when the air inflating time, an elastic rubber tube is tightened, covering the side holes, so that air can not from tyre in return. Auto valve are mainly divided into: British valve needle, an American automobile valve auto valve, French, and German and Italian auto valve needle valve.

And driving on the way, if the auto valve leakage, according to the following methods do emergency treatment:

1, such as a Tire Valve on the gas nozzle cap is made of metal, can be made, the right rubber washer. The manufacture method is: use a suitable diameter thin pipe, such as a steel cap, bullet shell in the rubber on the system, such a pad is better; if no thin pipe, can also be used scissors to cut out the rubber pad. Rubber gaskets are made, the plug in the gas nozzle cap, then tighten the valve cap, airtight book test can be used.

MS525 Car Tire Valve

2, find a diameter slightly bigger than the diameter of the hose valve copper rod, a head with thin metal Sizha tight, another end in the copper rod, also with thin metal Sizha tight. Fasten upon the inflatable, water does not leak can be used to test.

China’s rapid economic development for thirty years, the quality of life of the people have been greatly improved, most can manifest the point is that more and more vehicles.

Vehicle is a car maintenance, people also pays close attention to more and more, the people know how to repair the tire? Maybe a lot of people will say” tires need what maintenance, is to add the next gas OK!” When the wrong point of view, maintenance of tire, filling the knowledge inside there is still a lot of.

Automobile tires, we all know it is our driving safety, but how to” take care of” it?

TR455 Car Valve

We are to tire inflation when, should always pay attention to the barometer, I believe we all know, too much can cause air tire explosion, but the air is too little will also affect our driving experience. The most important point, we should first before the inflatable tire heat, otherwise it will affect the pressure, this is everybody filling ignore most. For Car Tire Valve, we also look at it and the valve core work is formed, is it right? Look at their level of defects, which will affect the tire in driving safety, nature would affect the safety of running vehicles. If the tire leaks air, the valve should be the dust away, don’t be a valve core release, but with the foam water onto the valve mouth, to see whether the leak.

The tire is a variety of a vehicle or machine is assembled on the ground rolling side of the annular elastic rubber products are usually installed metal rim, to collect the body, outside of the buffer against, realize from road contact and ensure the running performance of the vehicle. Recently, Michelin tires on tire knowledge class, let everyone right consciousness tire.

 Various Tire Valve characteristics of tire knowledge class teaches you comprehend the basic knowledge of tire, ask: correct understanding of tyre without any good?

 Correct understanding of tire, can being divergent conditions determine tire conditions, real-time replacement and adjustment, ensure the normal running of Enron and convenience.

TR1 Bicycle Tire Valve

                                        Tire Valve

 Tire category

 Are commonly used as flat tire, tire category is divided into two categories, the first category for bias tire, also known as the common tire. The carcass ply and a buffer layer, adjacent layers of Cord Cross, and takes the tread core line is less than 90℃the angular alignment of the pneumatic tire. That kind of tire vertical rigidity, is suitable for being ordinary roads and speed.

 Second kinds of commonly used tires for female meridian tire, the meridian tire commonly known as the” steel wire tyre”. The meridian tire characteristics as the cord is not mutual cross arrangement, but take the tire section connecting line, to the earth’s female meridian so arranged, cord angle is small, the surrogate China Normal is 0 °, carcass connections between without maintaining intersection, when the tire in driving course, crown around when the force delete great, would constitute a week Xiangshen Chi, carcass into a radially split. Because of this meridian tire buffer layer adopts are circumferentially arranged to deal with cord layer, and a carcass cord angle90 °intersect, normal70 °to 78 °, constitute a simply cannot reach Chi rigid annular zone. The spare tyre fixing, restrict the tire circumferential deformation, the buffer layer by Zero tires60% to within 70% when force. Be a meridian tire main stress components. It is called the meridian tire belt. Skewed fetal main stress components in the buffer layer, the80% to90% period when the force by the carcass ply burden. Thus, the meridian tire belt design is very important, must have good rigidity, layers can be large angle, high strength and not difficult to stretching the fiber materials, such as steel or glass fiber.

 Tire by what parts forming

 1: tire, tire tread, the sidewall, a buffer layer, ply and bead formation. The car is running for suffered all kinds of work force.

 In 2, the sidewall: sidewall tire lateral ply outer layer, for protecting carcass.

 3, ply carcass ply is: by parallel hanging plastic curtain female lines to form a layer of cloth, tire force skeleton layer, to assure tires have the necessary strength and dimensional stability. Buffer layer for bias tire surface and between the carcass ply cloth curtain layer or layer surrogate blog, used to buffer the external force, protecting carcass, promotional table to ply between the adhesive.

 4, bead: bead is installed on the rim of the tire is part, consists of a bead core and a bead pack cloth form, its fixed tire use. Tire specifications to tire outside diameter D, bead diameter rims or labyrinth D, section width B and flat than the size to represent, are in inches.

 5, automobile tires automobile tires: Rubber and fiber material and the normal metal materials composite products, manufacturing process is a machine for processing and inverse when integrated course. Rubber and the common agent mixing after extruded tread ply made; by rolling, cutting, laminating ply drum made of steel wire or cord rolls; joint venture, packets of plastic forming for the bead; then the semi-finished products are shaping machine are combined into a tire vulcanizing machine, are metal model, through vulcanization made of tire products.

 Ningbo Yinzhou Xinghua Metal Products Factory

In short, the Tire Valve and a tire angle seat valve rod cap play a very important role, helps to keep the tire pressure. They are perplexing links to your tire maintenance of one of the four components.

There are four main important fields, your tire maintenance: tire pressure, vehicle alignment, rotation of the tire and tread. This paper focuses on the tire pressure and has good tire valve and a tire angle seat valve stem the importance. Tire pressure tire pressure loss as to why and how? Tire basically is the loss of the pressure loss through the air. It is mainly through the rubber body, and each part of the natural leakage through the tire air permeability. Other factors affecting tire pressure, temperature, the temperature will lead to decline in” lost” pressure. As a rule of thumb, tire losses of 1pounds per degree Celsius temperature decreased 5 degrees. How do you know your car tire correct tire pressure? * information is usually provided by the automobile maker. You can usually find information, specification, glove box, or in the post. How to judge whether the tire pressure is at the correct level? * how do you know if your tire pressure to correct level is the best approach is to use a tire pressure gauge. Digital tire pressure gauge in the market can be very convenient, and tell the accurate tire pressure. Do not rely on visual inspection, in order to understand the tire pressure, because it is often not accurate. How long do you should check your tire pressure? * the recommended screening interval is one month or more.

 Tyre valve Tire Valve allows air pump into the tire and a one-way valve angle blocks hold the air in the tire. Tyre valve basically is a tire manufacturer to provide general rubber material components. It can not decrease with time, thereby reducing their effectiveness, while keeping the tire pressure maintaining air. When the vehicle is in a high-speed, continuous deterioration of a tire valve can actually curved centrifugal force, angle seat valve corrugated pipe valve and a diaphragm between the competition has lasted for a long time so as to cause the air loss. For security reasons, suggestions, they bought a new tire is replaced. Angle seat valve rod cap tire tire valve cap is also an important part of. High quality and design proper tire angle seat valve cap is normally sealed with a rubber, this will help keep the air pressure in the tire.

Zn Alloy Key Type Tire Valve Cap

                                                 Tire Valve

 They can be very important, especially in the tire valve failure as leakage backup system and tire angle seat valve cap can double-click the event.

 The valve cap is the main function, it can keep the dirt and dust of pollutants from road, which may affect the normal operation of a tire valve and the air loss results. Airtight tire angle seat valve rod cap also keep the moisture content and moisture in the air, which, in the cold season, can be frozen and consolidation, which poses a problem of tyre valve, causing the air loss.

Ningbo Yinzhou Xinghua Metal Products Factory 

Tire Valve cap is lost in time after complete valve cap is small, but it can prevent dust, small gravel into the valve, and the accumulation of dust and grit is likely to top air needle, causing a flat tire, so, check the tires to the attention of owners in the tire on the valve cap is missing, if you lose it to complete as soon as possible.

Parked vehicles to avoid valve damage parked vehicles to avoid tire is too close to the object, if the valve encounters hard objects, the valve is easy to be the root of rim and connections of the rubber tyre split, led.

TR414C  car Tire Valve

                                                                        Tire Valve

In addition, in the selection of Tire Valve also try to choose the shorter, currently on the market, although not to the valve cap is screwed down to check the tire pressure of the valve, the valve cap is too long, parked vehicles, easily meet roadside fixtures, so the car mainly chosen cautiously choose long valve cap.

Ningbo Yinzhou Xinghua Metal Products Factory

Inner tube Tire Valve occurs, a compression nut thread pinched the thread damage, transposon bending or valve tube damage effects of gas seal, must be replaced.

 Inner tube Tire Valve repair methods are as follows.

 ①check flange and inner tube valve adjacent sections have no defects. Such as technical condition is good, and the valve fixed good, should check valve.

 If the valve pipe can be repaired, only thread damage, can be a screw tap and a screw thread plate repair.

 ③do not use the valve should be replaced.

 The inner tube through the gaps from inside the valve removal. The inner tube wall without gap, can cut7~8mm export.

 The inner tube inside add new valve, its embedded flange hole, mounted on the bridge shaped pad, and a spanner nut tightening valve. Valve bridge pad to be installed, the major axis of the ellipse along the inner circumferential arrayed, rather than horizontal; and must not bend bridge shaped pad, the ends shall be30 °. Bridge shaped pad mounted to the outside, valve should be partially bent sideways toward the inner tube in the direction of.

 To fill the wound.

 The will to remove or embedded valve and open hole completion well stick.

⑧when replacing the light car inner tubes rubber mouth, available to the old knife valve, and silicon carbide grinding wheel in grinding valve tube remaining part, and then in a local and new rubber valve seat ( flange ) parts of glue, and drying.

TR414 Car Valve

                     Tire Valve

 The new Tire Valve is affixed to the ready to place, to make the valve hole accurately and tube hole is consistent, and the valve seat to be embedded inside the inner tube rubber edge. Roller rolling valve seat, and in the specialized curing valve with plate vulcanization.

Ningbo Yinzhou Xinghua Metal Products Factory 

(1) running for a period of time after such as automobile tire heat after filling. This is because the vehicles tire temperature will rise, the pressure effect.

(2) to check Car Tire Valve. Car Tire Valve and valve core if the match is not flat, convex concave phenomenon and other defects, are not convenient inflating and gas.

(3) should pay attention to the clean air. Filling the air into the containing water and oil, to prevent the inner tube rubber deterioration.

(4) inflatable should not exceed the standard too much, not because of the long-term business trip abroad not inflation and excessive inflation. Because the standard too much will make cord too spread, cause the reduction of strength, influence the service life of the tyre.

TR15 light truck Tire Valve

                           Car Tire Valve

(5) inflatable operation should be carefully. Before inflating Car Tire Valve of dust should be clean, do not loose valve core. Inflatable finished applications soap rubbed on the valve mouth, leak check, if leakage would produce continuous small bubbles. Then tighten the valve cap, preventing silt into the valve internal.

Ningbo Yinzhou Xinghua Metal Products Factory

Tires have exquisite, if not properly according to the essentials of inflation, will directly affect the service life of tire, can also cause some troubles in security.

In 1, pumping air into the tyre, time should be chosen in suspended after the tire when completely cooled, do not just stop car is eager to inflatable. When the vehicle runs, tire due to rolling friction, resulting in the tire temperature rising, and the pressure in the tire is elevated, pneumatic precision effect.

2, inflation before, but also to check the filling inside the tire air cleaner. Because the road edge some small repair shop, the inflatable equipment is pallet, dirty. Filling in the tire air may contain water, oil, can cause the inner tube rubber deformation metamorphism or early damage phenomenon.

TR4 Motorcycle Tire Valve

                                       Tire Valve

3, inflation should be the Tire Valve on the dirt, dust and clean. When inflated so as not to loose or take out valve core, rely on to increase pressure forced aeration, to avoid causing tripping leakage valve screw. Inflatable finished, should be dipped in water on the valve, leak check, so that as the case of tightening or replacing the valve core. Filled out, should also have locking valve cap, prevent sediment entering the Tire Valve.

Ningbo Yinzhou Xinghua Metal Products Factory

Tire Valve occurs, a compression nut thread pinched the thread damage, transposon bending or valve tube damage effects of gas seal, must be replaced.

Inner tube valve repair methods are as follows.

①check flange and Tire Valve adjacent sections have no defects. Such as technical condition is good, and the valve fixed good, should check valve.

If the valve pipe can be repaired, only thread damage, can be a screw tap and a screw thread plate repair.

③do not use the valve should be replaced.

The inner tube through the gaps from inside the valve removal. The inner tube wall without gap, can cut7~8mm export.

The inner tube inside add new valve, its embedded flange hole, mounted on the bridge shaped pad, and a spanner nut tightening valve. Valve bridge pad to be installed, the major axis of the ellipse along the inner circumferential arrayed, rather than horizontal; and must not bend bridge shaped pad, the ends shall be30 °. Bridge shaped pad mounted to the outside, valve should be partially bent sideways toward the inner tube in the direction of.

To fill the wound.

The will to remove or embedded valve and open hole completion well stick.

③when replacing the light car inner tubes rubber mouth, available to the old knife valve, and silicon carbide grinding wheel in grinding valve tube remaining part, and then in a local and new rubber valve seat ( flange ) parts of glue, and drying.

The new valve is affixed to the ready to place, to make the valve hole accurately and tube hole is consistent, and the valve seat to be embedded inside the inner tube rubber edge. Roller rolling valve seat, and in the specialized curing valve with plate vulcanization.

Ningbo Yinzhou Xinghua Metal Products Factory   http://www.tire-valve.com/